« Fujitsu Siemens Amilo M1424 » : différence entre les versions
Aucun résumé des modifications |
Aucun résumé des modifications |
||
Ligne 144 : | Ligne 144 : | ||
L'identifiant de la carte Radeon Mobility de cet ordinateur portable est 4e52 (voir la [http://pci-ids.ucw.cz/iii//?i=1002 table de référence]) et nous souhaiterons la faire reconnaitre par le driver comme s'il s'agissait de la carte ayant pour identifiant 4e50. | L'identifiant de la carte Radeon Mobility de cet ordinateur portable est 4e52 (voir la [http://pci-ids.ucw.cz/iii//?i=1002 table de référence]) et nous souhaiterons la faire reconnaitre par le driver comme s'il s'agissait de la carte ayant pour identifiant 4e50. | ||
=== Utilisation de l'ACPI | fglrx_binary_edit 4e50 4e52 | ||
Il est également possible de laisser le programme fglrx_binary_edit détecter quelle est l'identifiant de votre carte graphique actuelle, en ne lui précisant que l'identifiant que vous voulez forcer: | |||
fglrx_binary_edit 4e50 | |||
=== Mode console === | |||
configurer le framebuffer | |||
== Utilisation de l'ACPI == | |||
Pour mettre l'ordinateur en hibernation prolongée, une fois que le support de l'ACPI est configuré, il suffit de lancer: | Pour mettre l'ordinateur en hibernation prolongée, une fois que le support de l'ACPI est configuré, il suffit de lancer: | ||
Ligne 153 : | Ligne 164 : | ||
echo mem > /sys/power/state | echo mem > /sys/power/state | ||
Version du 18 septembre 2005 à 09:36
Spécifications du matériel
à faire...
lspci:
0000:00:00.0 Host bridge: Intel Corporation 82855PM Processor to I/O Controller (rev 21) 0000:00:01.0 PCI bridge: Intel Corporation 82855PM Processor to AGP Controller (rev 21) 0000:00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03) 0000:00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03) 0000:00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 03) 0000:00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 03) 0000:00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 83) 0000:00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 03) 0000:00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 03) 0000:00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 03) 0000:00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03) 0000:00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03) 0000:01:00.0 VGA compatible controller: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10] 0000:02:09.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) 0000:02:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 0000:02:0b.0 CardBus bridge: O2 Micro, Inc. OZ711M1/MC1 4-in-1 MemoryCardBus Controller (rev 20) 0000:02:0b.1 CardBus bridge: O2 Micro, Inc. OZ711M1/MC1 4-in-1 MemoryCardBus Controller (rev 20) 0000:02:0b.2 System peripheral: O2 Micro, Inc. OZ711Mx 4-in-1 MemoryCardBus Accelerator 0000:02:0d.0 Network controller: Intel Corporation PRO/Wireless 2200BG (rev 05)
cat /proc/pci:
PCI devices found: Bus 0, device 0, function 0: Host bridge: Intel Corporation 82855PM Processor to I/O Controller (rev 33). Prefetchable 32 bit memory at 0xe0000000 [0xefffffff]. Bus 0, device 1, function 0: PCI bridge: Intel Corporation 82855PM Processor to AGP Controller (rev 33). Master Capable. Latency=64. Min Gnt=10. Bus 0, device 29, function 0: USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 3). IRQ 11. I/O at 0xe800 [0xe81f]. Bus 0, device 29, function 1: USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 3). IRQ 11. I/O at 0xe880 [0xe89f]. Bus 0, device 29, function 2: USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 3). IRQ 11. I/O at 0xec00 [0xec1f]. Bus 0, device 29, function 7: USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 3). IRQ 11. Non-prefetchable 32 bit memory at 0xffeffc00 [0xffefffff]. Bus 0, device 30, function 0: PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 131). Master Capable. No bursts. Min Gnt=6. Bus 0, device 31, function 0: ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 3). Bus 0, device 31, function 1: IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 3). IRQ 11. I/O at 0xffa0 [0xffaf]. Non-prefetchable 32 bit memory at 0x20000000 [0x200003ff]. Bus 0, device 31, function 3: SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 3). I/O at 0x540 [0x55f]. Bus 0, device 31, function 5: Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 3). IRQ 9. I/O at 0xd800 [0xd8ff]. I/O at 0xe000 [0xe03f]. Non-prefetchable 32 bit memory at 0xffeff800 [0xffeff9ff]. Non-prefetchable 32 bit memory at 0xffeff400 [0xffeff4ff]. Bus 0, device 31, function 6: Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 3). IRQ 9. I/O at 0xe400 [0xe4ff]. I/O at 0xe080 [0xe0ff]. Bus 1, device 0, function 0: VGA compatible controller: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10] (rev 0). IRQ 11. Master Capable. Latency=255. Min Gnt=8. Prefetchable 32 bit memory at 0xd0000000 [0xd7ffffff]. I/O at 0xb000 [0xb0ff]. Non-prefetchable 32 bit memory at 0xffcf0000 [0xffcfffff]. Bus 2, device 9, function 0: FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) (rev 0). IRQ 11. Master Capable. Latency=64. Min Gnt=3.Max Lat=4. Non-prefetchable 32 bit memory at 0xffdff800 [0xffdfffff]. Non-prefetchable 32 bit memory at 0xffdf8000 [0xffdfbfff]. Bus 2, device 10, function 0: Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 16). IRQ 9. Master Capable. Latency=64. Min Gnt=32.Max Lat=64. I/O at 0xc800 [0xc8ff]. Non-prefetchable 32 bit memory at 0xffdff400 [0xffdff4ff]. Bus 2, device 11, function 1: CardBus bridge: O2 Micro, Inc. OZ711M1/MC1 4-in-1 MemoryCardBus Controller (#2) (rev 32). IRQ 11. Master Capable. Latency=168. Min Gnt=128.Max Lat=5. Non-prefetchable 32 bit memory at 0x20001000 [0x20001fff]. Bus 2, device 11, function 0: CardBus bridge: O2 Micro, Inc. OZ711M1/MC1 4-in-1 MemoryCardBus Controller (rev 32). IRQ 11. Master Capable. Latency=168. Min Gnt=128.Max Lat=5. Non-prefetchable 32 bit memory at 0x20002000 [0x20002fff]. Bus 2, device 11, function 2: System peripheral: O2 Micro, Inc. OZ711Mx 4-in-1 MemoryCardBus Accelerator (rev 0). IRQ 11. Master Capable. Latency=64. Non-prefetchable 32 bit memory at 0xffdfe000 [0xffdfefff]. Bus 2, device 13, function 0: Network controller: Intel Corporation PRO/Wireless 2200BG (rev 5). IRQ 11. Master Capable. Latency=64. Min Gnt=3.Max Lat=24. Non-prefetchable 32 bit memory at 0xffdfd000 [0xffdfdfff].
Installation de Linux
J'utilise une distributions Gentoo sur cet ordinateur, en cas de soucis les forums seront d'une aide précieuse !
Configuration de la carte graphique
Interface graphique X11
Voir binary_edit
Il faut tout d'abord vérifier que les pciutils sont installés:
emerge sys-apps/pciutils
Télécharger le programme de patch pour les binaires ATI à ce lien: fglrx_binary_edit.tar.bz2
Décompresser et compiler le package:
# tar xjvf fglrx_binary_edit.tar.bz2 fglrx_binary_edit/ fglrx_binary_edit/Makefile fglrx_binary_edit/fglrx_binary_edit.c
# cd fglrx_binary_edit # make gcc -o fglrx_binary_edit fglrx_binary_edit.c -lpci
L'identifiant de la carte Radeon Mobility de cet ordinateur portable est 4e52 (voir la table de référence) et nous souhaiterons la faire reconnaitre par le driver comme s'il s'agissait de la carte ayant pour identifiant 4e50.
fglrx_binary_edit 4e50 4e52
Il est également possible de laisser le programme fglrx_binary_edit détecter quelle est l'identifiant de votre carte graphique actuelle, en ne lui précisant que l'identifiant que vous voulez forcer:
fglrx_binary_edit 4e50
Mode console
configurer le framebuffer
Utilisation de l'ACPI
Pour mettre l'ordinateur en hibernation prolongée, une fois que le support de l'ACPI est configuré, il suffit de lancer:
echo disk > /sys/power/state
Pour le mettre en veille et stocker l'état de l'ordinateur en mémoire, il faut plutôt utiliser:
echo mem > /sys/power/state