Différences entre les versions de « Guest VMWare »

De FrozenWiki
Aller à la navigation Aller à la recherche
Ligne 62 : Ligne 62 :
* Restart the networking components:
* Restart the networking components:
  sudo /etc/init.d/networking restart
  sudo /etc/init.d/networking restart
(Reference : http://www.howtogeek.com/howto/ubuntu/change-ubuntu-server-from-dhcp-to-a-static-ip-address/)

Version actuelle datée du 25 juillet 2010 à 17:23

Create a new Virtual Machine in VMWare Server Administration Tool

  • Open VM console
  • Create Virtual Machine:
    • Give a name
    • Datastore: standard
    • Guest OS: Linux operating system / Ubuntu Linux (64-bit)
    • Memory size: 128MB
    • #CPU: 1
    • Create a new virtual disk: 4GB , Policies>> Optimize for performance
    • Add a Network Adapter (bridged)
    • Use an ISO image: ubuntu-10.04-server-adm64.iso
    • Don't add a floppy drive
    • Don't add a USB controller
    • Finish

Install Ubuntu

Open the VM Console and startup the machine to setup Ubuntu.

  • Choose language: English
  • Press F4 for the installation modes
  • Select "Instal a minimal virtual machine"
  • Select "Install Ubuntu Server"
  • Choose language: English
  • Choose Region: other // Europe // France
  • Choose detect keyboard layout and follow instructions with keys to press
  • The initial settings will install
  • Enter hostname
  • Confirm timezone
  • Choose Guided - use entire disk partitioning
  • Validate writing changes to the filesystem
  • The base system will install
  • Create the inital user
  • Ignore the proxy settings
  • Choose to "install security updates automatically"
  • Install these packages:
      (*) Basic Ubuntu server  (maybe not req !)
      (*) OpenSSH server
      (*) Virtual Machine host  (maybe not req!)
  • Reboot server
  • Configure network
  • Install packages:
      apt-get install joe
      apt-get install VM-TOOLS
      apt-get install xfce4
      apt-get install x11vnc
      apt-get install ia32-libs

Change Ubuntu Server from DHCP to a Static IP Address

  • Open up the /etc/network/interfaces file. For the primary interface, which is usually eth0, you will see these lines:
auto eth0
iface eth0 inet dhcp

Change it to values similar to:

auto eth0
iface eth0 inet static
  • Add the DNS settings in the /etc/resolv.conf file. On the line ‘name server xxx.xxx.xxx.xxx’ replace the x with the IP of your name server. (You can do ifconfig /all to find out what they are)
  • Restart the networking components:
sudo /etc/init.d/networking restart

(Reference : http://www.howtogeek.com/howto/ubuntu/change-ubuntu-server-from-dhcp-to-a-static-ip-address/)