« Wacom Graphire 2 » : différence entre les versions
Aller à la navigation
Aller à la recherche
Aucun résumé des modifications |
|||
(2 versions intermédiaires par le même utilisateur non affichées) | |||
Ligne 1 : | Ligne 1 : | ||
<i>(en construction)</i> | |||
( | Pour utiliser cette tablette graphique sous linux, il faut d'abord configurer le noyau : | ||
Device Drivers ---> | |||
Input device support ---> | |||
<M> Event interface | |||
USB support ---> | |||
<M> USB Human Interface Device (full HID) support | |||
<M> Wacom Intuos/Graphire tablet support | |||
Puis il faut monter le module : | |||
$ modprobe wacom | |||
La configuration de Xorg.conf est un peu plus délicate, on va ajouter au fichier les lignes suivantes : | |||
<pre> | |||
Section "Module" | |||
... | |||
Load "wacom" | |||
EndSection | |||
</pre> | |||
<pre> | |||
Section "InputDevice" | |||
Identifier "stylus" | |||
Driver "wacom" | |||
Option "Type" "stylus" | |||
Option "Device" "/dev/input/event3" | |||
Option "USB" "on" | |||
EndSection | |||
Section "InputDevice" | |||
Identifier "eraser" | |||
Driver "wacom" | |||
Option "Type" "eraser" | |||
Option "Device" "/dev/input/event3" | |||
Option "USB" "on" | |||
EndSection | |||
Section "InputDevice" | |||
Identifier "cursor" | |||
Driver "wacom" | |||
Option "Type" "cursor" | |||
Option "Device" "/dev/input/event3" | |||
Option "USB" "on" | |||
EndSection | |||
</pre> | |||
<pre> | |||
Section "ServerLayout" | |||
... | |||
InputDevice "stylus" "AlwaysCore" | |||
InputDevice "eraser" "AlwaysCore" | |||
InputDevice "cursor" "AlwaysCore" | |||
EndSection | |||
</pre> | |||
Sous gentoo on peut aussi emerger le paquet linuxwacom qui va nous ajouter les utilitaires wacdump entre autre : | |||
$ emerge linuxwacom | |||
== Autres sources d'informations == | |||
* [http://linuxwacom.sourceforge.net/ linuxwacom] |
Dernière version du 22 novembre 2006 à 13:56
(en construction)
Pour utiliser cette tablette graphique sous linux, il faut d'abord configurer le noyau :
Device Drivers ---> Input device support ---> <M> Event interface USB support ---> <M> USB Human Interface Device (full HID) support <M> Wacom Intuos/Graphire tablet support
Puis il faut monter le module :
$ modprobe wacom
La configuration de Xorg.conf est un peu plus délicate, on va ajouter au fichier les lignes suivantes :
Section "Module" ... Load "wacom" EndSection
Section "InputDevice" Identifier "stylus" Driver "wacom" Option "Type" "stylus" Option "Device" "/dev/input/event3" Option "USB" "on" EndSection Section "InputDevice" Identifier "eraser" Driver "wacom" Option "Type" "eraser" Option "Device" "/dev/input/event3" Option "USB" "on" EndSection Section "InputDevice" Identifier "cursor" Driver "wacom" Option "Type" "cursor" Option "Device" "/dev/input/event3" Option "USB" "on" EndSection
Section "ServerLayout" ... InputDevice "stylus" "AlwaysCore" InputDevice "eraser" "AlwaysCore" InputDevice "cursor" "AlwaysCore" EndSection
Sous gentoo on peut aussi emerger le paquet linuxwacom qui va nous ajouter les utilitaires wacdump entre autre :
$ emerge linuxwacom